Tag: Unable
I Have A Hp Deskjet 3740 Printer. I Am Unable To Print From Ms Dos Based Program. How Can I Solve This Problem
by admin on ก.พ..12, 2010, under Deskjet Help Forums
That is a wondows printer, there are no print drivers for the HP 3740. If it is text you are printing you have 2 options, copy and paste into a word program or load a generic dos printer in the dos program and try it again. You probably will lose any special formatting but it should be legible.
I Have A Acer 3680 Laptop Computer, And Have Been Unable To Get My Hp3900 Deskjet Printer To Work With It…?
by admin on ก.พ..07, 2010, under Deskjet Help Forums
Are you using USB, Parallel, or Wireless connection ? Probably not wireless. try this.. un install the drivers. if USB, leave the printer un plugged from the system, install the drivers from the CD and then plug in the USB cable to the PC with the printer power on. It should see the printer and re-install automatically. If you are using parallel, you need to go into the BIOS of the computer, set the parallel port to ECP using irq 7 and DMA 3. this will allow 2-way communication with the printer. HP requires this for their parallel connections and lexmark too.
Does Anyone Have Any Suggestions Why I Am Unable To Set Up My Hp Deskjet Printer?i Have The Driver On A Disk .
by admin on ม.ค..18, 2010, under Deskjet Help Forums
I’ve also downloaded the driver from the hewlett packard web site but nothing seems to work.It begins the setup process then acts as if it’s losing power from the usb because I’ll disconnect it then reconnect and it will begin again, but it never finishes…….
When I Try To Check Ink Levels, It Says “the Computer Is Unable To Communicate Two Way Communications With The
by admin on ธ.ค..25, 2009, under Deskjet Help Forums
devise.” I have an hp photosmart c3100 printer. Cannot check ink levels. (used to be able to).
is something disconnected. How can I fix this..since I am new o computer somewhat, please say it in easy term to understand..thanKs
Unable To Print From Hp Photosmart 7260?
by admin on พ.ย..30, 2009, under Deskjet Help Forums
The printer has worked perfectly since 2004. Now it will not print from MS Word or Notepad. The 7260 is set as the default printer. The printer port (DOT4_001) was uninstalled and the computer found the printer after re-starting the computer and connecting the printer. Printer software has been re-installed. USB cables have been changed and different USB connections tried (5 available) on my ASUS laptop. Print queue has been cleared and Print spooler stopped and started. Clicking on “reconnect hp 7200….from the warning icon in the system tray removed the red cross from the warning icon but did not resolve the problem.
Where to now????
